| WAVEFORM CHARACTERISTICS |
|
| Frequency Range | 1 µHz to 20 MHz |
| Amplitude Flatness | (relative to 1 kHz)
< 100 kHz
100 kHz to 5 MHz
5 MHz to 20 MHz |
0.1 dB
0.15 dB
0.3 dB |
| Harmonic distortion |
| | < 1 VPP | ≥ 1 VPP |
| DC to 20 kHz | -70 dBc | -70 dBc |
| 20 kHz to 100 kHz | -65 dBc | -60 dBc |
| 100 kHz to 1 MHz | -50 dBc | -45 dBc |
| 1 MHz to 20 MHz | -40 dBc | -35 dBc |
| Total harmonic distortion |
| DC to 20 kHz | 0.04% |
| Spurious (non-harmonic) |
| DC to 1 MHz | -70 dBc |
| 1 MHz to 20 MHz | -70 dBc + 6 dB/octave |
| Phase noise |
| (10 kHz offset) | -115 dBc / Hz, typical |
|
| Frequency range | 1 µHz to 20 MHz |
| Rise/Fall time | < 13 ns |
| Overshoot | < 2% |
| Variable duty cycle | 20% to 80% (to 10 MHz)
40% to 60% (to 20 MHz) |
| Asymmetry (@ 50% duty) | 1% of period + 5 ns |
| Jitter (RMS) | 1 ns + 100 ppm of period |
|
| Frequency range | 1 µHz to 200 kHz |
| Linearity | < 0.1% of peak output |
| Variable Symmetry | 0.0% to 100.0% |
|
| Frequency range | 500 µHz to 5 MHz |
Pulse width
(period ≤ 10s) | 20 ns minimum
10 ns resolution |
| Variable edge time | < 13 ns to 100 ns |
| Overshoot | < 2% |
| Jitter (RMS) | 300 ps + 0.1 ppm of period |
|
| Bandwidth | 10 MHz typical |
|
| Frequency range | 1 µHz to 6 MHz |
| Waveform length | 2 to 64 K points |
| Amplitude resolution | 14 bits (including sign) |
| Sample rate | 50 MSa/s |
| Min. Rise/Fall Time | 35 ns typical |
| Linearity | < 0.1% of peak output |
| Settling Time | < 250 ns to 0.5% of final value |
| Jitter (RMS) | 6 ns + 30 ppm |
| Non-volatile memory | four waveforms |
| COMMON CHARACTERISTICS |
|
| Resolution | 1 µHz |
|
| Range | 10 mV PP to 10 VPP into 50Ω
20 mV PP to 20 V PP into open circuit |
| Accuracy (at 1 kHz) | ± 1% of setting ± 1 mV PP |
| Units | V PP , V rms , dBm |
| Resolution | 4 digits |
|
| Range (peak AC + DC) | ± 5 V into 50Ω
± 10 V into open circuit |
| Accuracy | ± 2% of offset setting
± 0.5% of amplitude ± 2 mV |
| Resolution | 4 digits |
|
| Impedance | 50 Ω typical |
| Isolation | 42 Vpk maximum to earth |
| Protection | Short-circuit protected, overload automatically disables main output |
|
| Accuracy | ± 10 ppm in 90 days
± 20 ppm in 1 year |
|
| Rear Panel Input |
| Lock Range | 10 MHz ± 500 Hz |
| Level | 100 mV PP to 5 V PP |
| Impedance | 1 kΩ typical, AC coupled |
| Lock Time | < 2 seconds |
| Rear Panel Output |
| Frequency | 10 MHz |
| Level | 632 mV PP (0 dBm), typical |
| Impedance | 50 Ω typical, AC coupled |
| Phase Offset |
| Range | + 360° to - 360° |
| Resolution | 0.001° |
| Accuracy | 20 ns |
| GENERAL |
| Power Supply | CAT II
100 - 240V @ 50/60Hz (-5%, +10%)
100 - 120V @ 400Hz (±10%) |
| Power Consumption | 50 VA max |
| Operating Environment | IEC 61010
Pollution Degree 2
Indoor Location |
| Operating Temperature | 0°C to 55°C |
| Operating Humidity | 5% to 80% RH, non-condensing |
| Operating Altitude | Up to 3000 meters |
| Storage Temperature | -30°C to 70°C |
| State Storage Memory | Power off state automatically saved.
Four user-configurable stored states |
| Interface | USB, GPIB, and LAN standard |
| Language | SCPI - 1993, IEEE-488.2 |
| Language | SCPI - 1993, IEEE-488.2 |
| Dimensions (W x H x D) |
| Bench top | 261.1mm x 103.8mm x 303.2mm |
| Rack mount | 212.8mm x 88.3mm x 272.3mm |
| Weight | 3.4 kg (7.5 lbs) |
| Safety Designed to | UL-1244, CSA 1010, EN61010 |
| EMC Tested to | MIL-461C, EN55011, EN50082-1 |
| Vibration and Shock | MIL-T-28800, Type III, Class 5 |
| Acoustic Noise | 30 dBa |
| Warm-up Time | 1 hour |
